Empire Radiator Table ~ 3 Legs (RT/170, RT/220)

From: £287.00

At last an alternative to the rather inelegant Radiator Cover to be found in every DIY store!

Our Empire Radiator Table still allows the radiator to do what it was designed for whilst at the same time significantly reducing its visual impact. The table has an MDF top to reduce the possibility of shrinkage cracks caused by the heat and two simple self assembly legs (plus an optional 3rd leg on these larger versions which can be slotted in if required – more for visual effect than structural). Simply fix to the wall by screwing through the rear rail or use mirror plates. As the table effectively ‘hooks’ over the radiator it is often the case that you do not need to fix the table at all as the radiator will prevent the table from tipping forward (just check that there is at least 18mm gap between wall and the radiator). Legs can be cut on site to suit height requirements but please note that we can make to any size to suit most radiators.

Our radiator tables are supplied at 100cm height to cater for most situations. Legs can be cut on site to suit most height requirements or if you would like us to trim them down for you then you can select this option by checking the box below and stating the Finished Table Height (not Leg height) in the notes box. This will add £25 per table. Please ensure you have studied the diagram showing our suggested dimensions based on the size of the radiator. We are unable to accept returns if we have trimmed them to your requested size.

If you require a table lower than 80cm or taller than 100cm is required this would need to be a custom order.

Click on the sketch for advice on working out customised versions and if the size is outside the scope of what the website allows simply email or phone us for a quote!

Please see our Finishes & Options page for details of the different looks you can specify for this piece.