Tables

Welcome to Scumble Goosie! We handcraft solid wood furniture and can supply this either handpainted or unfinished (raw) in standard sizes from stock or made to your measurements. We also carry a wide selection of home accessories and unusual giftware. Click on the links below or simply contact us if you cannot find what you are looking for.

LoadingUpdating...

D End Radiator Table (to suit 60 - 80cm radiators) D End Radiator Table (to suit 60 - 80cm radiators)D End Radiator Table (to suit 60 - 80cm radiators)

click for larger image

B




RT2 - D End Radiator Table (to suit 60 - 80cm radiators)

Price (raw): £ 167.00   Price (painted): £ 319.00

105cm W x 25cm D x 100cm H

Shown here in raw wood and one in our showroom in Little Greene Rolling Fog.

At last an alternative to the rather inelegant Radiator Cover to be found in every DIY store!

This piece still allows the radiator to do what it was designed for whilst at the same time significantly reducing its visual impact. It also provides a useful shelf. The table has an MDF top to reduce the possibility of shrinkage cracks caused by the heat and two simple self assembly legs. Simply fix to the wall by screwing through the rear rail or use mirror plates. As the table effectively "hooks" over the radiator you may even find that you do not need to fix the table at all as the radiator will prevent the table from tipping forward.

Legs can be cut "on site" to suit height requirements but please note that we can make to any size to suit most radiators . Very wide bespoke versions may benefit visually from an extra middle leg but we can discuss this with you when you order.

The first image shows the table in its raw state. The other image was taken in our showrooms where we have cut the legs of a standard table down by about 10cm to allow the table to sit just below a dado rail. This demonstrates just how effective these tables are at drawing the eye away from the radiator.

The radiator, table and panelling have all been painted in the same colour to minimise the visual impact of the radiator.

This size is ideal for a single or double conventional pressed steel radiator between 60 and 80cm wide but we can make to other sizes if required. If the size you need is outside the scope of what the website allows simply email or phone us for a quote! As a general rule for a standard single or double pressed steel radiator the depth needs to be at least 12cm more than the face of the radiator, 25cm wider and 5cm higher. This will give the overall maximum size of the table including the overhang of the top. We have included an image of the underside of these tables to assist with working out sizes.

Customise your order

Current Price: £ 167.00



The standard size of this piece (105cm W x 25cm D x 100cm H) can be reduced or increased by up to 20% in each dimension using the boxes below. The price will show automatically and is dependant on the number of changes you make. For dimensional changes outside of these parameters please contact us for a quote. Please see Common Questions for more information on altering sizes of furniture.

Width:Up to +/- 21 cms Change to: cms
Depth:Up to +/- 5 cms Change to: cms
Height:Up to +/- 20 cms Change to: cms


Quantity: