Dimensions: 80cm W x 25cm D x 100cm H | |
Dimensions: 100cm W x 25cm D x 100cm H | |
Dimensions: 120cm W x 25cm D x 100cm H | |
Dimensions: 140cm W x 25cm D x 100cm H |
From: £177.00
At last an alternative to the rather inelegant Radiator Cover to be found in every DIY store!
Our Empire Radiator Table still allows the radiator to do what it was designed for whilst at the same time significantly reducing its visual impact. The table has an MDF top to reduce the possibility of shrinkage cracks caused by the heat and two simple self assembly legs. Simply fix to the wall by screwing through the rear rail or use mirror plates. As the table effectively ‘hooks’ over the radiator you may even find that you do not need to fix the table at all as the radiator will prevent the table from tipping forward (just check that there is at least 18mm gap between wall and the radiator).
Our radiator tables are supplied at 100cm height to cater for most situations. Legs can be cut on site to suit most height requirements or if you would like us to trim them down for you then you can select this option by checking the box below and stating the Finished Table Height (not Leg height) in the notes box. This will add £25 per table. Please ensure you have studied the diagram showing our suggested dimensions based on the size of the radiator. We are unable to accept returns if we have trimmed to your requested size.
If you require a table lower than 80cm or taller than 100cm is required this would need to be a custom order.
Please note that we can make to any size to suit most radiators. The front and side aprons of the table are about 13cms high including the top.
Please see our Finishes & Options page for details of the different looks you can specify for this piece.
We recommend you choose a table 20cm wider than the top of your radiator, about 5cm higher and at least 10cm deeper than the face of your radiator – see the diagram above.
The first image shows the table in its raw state. The other images were taken in our showrooms. Both the table, panelling and radiator have been painted in the same colour to minimise the impact of the radiator. Also we show one in our Walnut Stain finish where we have painted the MDF top in Bagheeras Paws to mimic slate and one where we have done an off-white solid paint colour to complement a Liming Oil finish on the rest of the table.
Click on the sketch for advice on working out customised versions and simply email us for a quote.
Dimensions: 80cm W x 25cm D x 100cm H | |
Dimensions: 100cm W x 25cm D x 100cm H | |
Dimensions: 120cm W x 25cm D x 100cm H | |
Dimensions: 140cm W x 25cm D x 100cm H |